Takeiki
Top
UV / GERMICIDAL
Display: ListGrid
Show:
Sort By:
Accessories
Lesco Spares
  Liquid Light Guides
   
OLB1003 5mm x 1M Liquid Light guide
OLB1004 5mm x 1.5M Liquid Light guide
OLB1009 5mm x 3M Liquid Light guide
OLB1008 8mm x 1M Liquid Light guide
OLB1010 8mm x 1.5M Liquid Light guide
OLB1001 2 x 3mm x 1M Dual Liquid Light guide
OLB1002 2 x 3mm x 1.5M Dual Liquid Light guide
OLB1012 3 x 3mm x 1.5M Trifurcated Liquid Light guide
   
  Standard Fiber Optic Light Guides
   
OLB1081 LTGD FO SINGLE  3mm ID X 5mm OD X 44 IN L
OLB1157 LTGD FO SINGLE  5mm ID X 7mm OD X 1ML
OLB1166 LTGD FO SINGLE  5mm ID X 8mm OD X 1.5ML
OLB1167 LTGD FO    1:2      3mm ID X 5mm OD X 1ML
OLB1065 LTGD FO    1:2      1.77mm ID X 5mm OD X 1.5M L
OLB1058 LTGD FO    1:3      1.77mm ID X 2.5mm OD X 1.5 ML
OLB1057 LTGD FO    1:4      1.77mm ID X 2.5mm OD X 1.5 ML
OLB1016 LTGD FO    1:4      .394IN X .217IN  RECTANGULAR TIP
OLB1182 LTGD FO    1:3      3mm ID X 5mm OD X 1ML
   
  High Power Fused Fiber Optic Light Guides
   
OLB1081-F LTGD FUSED FO SNGL 3mm ID X 5mm OD X 44 IN L
OLB1157-F LTGD FUSED FO SNGL 5mm ID X 7mm OD X 1M L
OLB1166-F LTGD FUSED FO SNGL 5mm ID X 8mm OD X 1.5M L
OLB1167-F LTGD FUSED FO   1:2   3mm ID X 5mm OD X 1ML  
OLB1065-F LTGD FUSED FO   1:2   1.77mm ID X 5mm OD X 1.5M L
   
  Light guide Accessories
   
OLB9003 360 Degree Cure Fixture/ Includes light guide adapter
OLB9007 UV Spotcure Collimator fits 5mm Light guides
VXB1001 UV Safety eyewear
AIB1001 Spot cure Radiometer UV Intensity Meter
VSM9001 Calibration Fixture Quartz
VUM1003 UV Safe Enclosure 14”x14”x8” ( Super Spot MKII)
VUM1018 UV Safe Enclosure 14”x14”x8” (MKIII, MAX, Max Elite,Spectrum100, Cool Cure)
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1007 Ambient UV Safety Radiometer
ARB1014 Radiometer Power Puck 2 Hi Power 10mW-10W, UVA,UVB,UVC,UVV
ARB9002 MICROCURE Starter Kit : 2-MICROCURE Radiometers and 1-Data Reader
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth
LXB1008 FLUORESCENT LAMP / For Bench Top Inspection Light
OFB1004 280-480nm IR Filter
OFB1008 280-400nm IR Filter
OFB1013 280-500nm IR Filter
OFB1014 280-320nm IR Filter
OFB1017 280-480nm IR Filter (60% Transmission)
OFB1019 400-500nm IR Filter
OFB1021 320-400nm IR Filter
LPB0601 Spectrum 60 Bulb
LPB1005  MKII Bulb
LPB1002 Rocket 225 Bulb
LPB1003 Rocket LP Bulb
LPB1008 MKIII / MAX 100W Bulb
LPB2001 MAX-HP 200W Bulb
LPB1013 Green Spot Bulb  (GS3100)
LPB1014 Spectrum 100 / Green Spot Bulb (GS3120)
KKB5001 Cure Max Bulb Kit

Lesco Singapore Distributor

AUV WEST C636R Heavy Duty Industrial UV conveyor
FCM0610
AUV WEST Part #   Description
   
FCM0610  AUV WEST C636R Heavy Duty Industrial UV conveyor
  with one (1) Fusion F-300-6 lamp system with “D” or “H” bulb configuration
   
  System includes:
  *  Light shielding
  *  Six inch belt and six inch cure width.
  *  Variable belt speed .
  *  Adjustable lamp height.
  *  Clearance for two inch high parts.
  *  Variable vacuum hold down.
  *  Teflon coated fiberglass belt.
  *  Exhaust blower w/vertical stack.
  *  Easy finger tip belt adjustment.
  *  Closed loop digital speed readout
  *  90 degree swivel capability
  *  Clean out tray under removable bed section
     *  Dimensions 49"L x 25"W x 30"H
   
   
  OPTIONS
   
FOM2002 Closed loop speed control digital speed readout and RS232
FOM0602 Clearance for 4 inch high parts
FOM0611 Clearance for 6 inch high parts
FOM1205 One button start
FOM0605 Stand for conveyor
BMB0601 Spare conveyor belt #6751005M
KKB1002 Recommended Spare Parts Kit for F300-6 w/”D” bulb.
XNB1001 Spare F300-6 “D” bulb.
KKB1001 Recommended Spare Parts Kit for F300-6 w/”H” bulb.
XNB2001 Spare F300-6 H” bulb.
FOM0608 220 Volt, 50 Hz conversion
Custom Nitrogen Purge Kit
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Data read
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth
   
  AUV WEST C612
   
AUV WEST Part #   Description
   
FCM1205  AUV WEST C612D Heavy Duty Industrial UV conveyor
  with one (1) Fusion F-300-12 lamp system with “D” or “H” bulb configuration
   
  System includes:
  *  Light shielding
  *  Twelve inch belt width.
  *  Six, ten or twelve inch cure width (depending on lamp choice).
  *  Variable belt speed.
  *  Adjustable lamp height.
  *  Clearance for two inch high parts.
  *  Variable vacuum hold down.
  *  Teflon coated fiberglass belt.
  *  Build-in exhaust blower.
  *  Easy finger tip belt adjustment.
  *  Digital Speed Control W/ read out
     *  Dimensions 70" L x 32"W x 36"H
   
   
  OPTIONS
   
FOM2002 Closed loop speed control digital speed readout and RS232
FOM1217 Clearance for 4 inch high parts C612D
FOM1203 One button start for F300-12
BMB1202 Spare conveyor belt 12 X 138.5 inches Mesh Black
KKB1002 Recommended Spare Parts Kit for F300-6 w/”D” bulb.
XNB1001 Spare F300-6 “D” bulb.
KKB1001 Recommended Spare Parts Kit for F300-6 w/”H” bulb.
XNB2001 Spare F300-6 H” bulb.
FOM0608 220 Volt, 50 Hz conversion
Custom Nitrogen Purge Kit
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Dataread
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth

Bottle Curing System
Spinster

Bottle Curing System

The Spinster UV Bottle Curing system from Lesco instantaneously cures all sides of screen printed plastic, metal and glass containers from 1/4 oz. to 1 gallon. Round, square, hex, oval or tapered bottles of various shapes and sizes can be run one after another with little or no adjustment between the different sizes. The Spinster has a unique and patented rotational conveyor and reflector design placement that ensures complete 360° curing.

Standard Features

  • Variable speed 
  • Can be used with 6" or 10" lamps
  • Designed for microwave or mercuryarc UV curing system 
  • Requires only 15 sq. ft of floor space
  • Patented technology

Information from Lesco/ American Ultraviolet.

Takeiki is Lesco Singapore Distributor

COOL CURE 365 uv led spot curing system
FLM1003

LED UV Curing - Cool Cure 365/395

The Cool Cure 365/395 UV LED curing device is the most powerful LED UV spot curing device on the market. It's a direct replacement for old, hot, mercury arc lamp technology and produces much less heat by using LED curing light to cure adhesives on medical devices, electronics and other industrial and commercial applications.

The high power UV LED Cool Cure 365/395 is a lightweight system (only 10 lbs) that emits minimal IR wave lengths, and requires no filters or replacement lamps. It uses a standard liquid light guide and has the benefit of low cost and high ROI.

Cool Cure 395

Ask about the Cool Cure 395, with an output range of 0-25 w/cm2 and a spectral range of 395-400nm

Replacement Spares

EVB2115 Replacement Footswitch
KFB1003 Intake Filter (5 pack)

 

Lesco Singapore Distributor

CureMax Controller board
EEB1078

P/N EEB1078- Control board Cure Max

Lesco Singapore Distributor

Lesco CureMAX
CureMax

Cure Max

The newly developed LESCO CureMAX system provides the highest intensity UV light for uniformly curing a large area. This precision exposure is achieved by our unique design. Utilizing a shutter, this device can control the dosage of exposure applied to your parts. The maximum part size is 7.75"L x 7.75"W x 6.0"H, for the rugged standard stainless steel curing chamber, and this chamber can be customized to accommodate larger sized parts. Clean room ready, the CureMAX System uses an arc lamp with as reflector to achieve low maintenance costs, and the removable Lamp Module ensures you can always have a spare bulb to prevent critical downtime. Cooling fans are provided to obtain a controlled curing environment for the lamp/reflector assembly and the Power Control Module (PCM). Also available with an optional extra-cooling parts chamber. The shutter can be activated by the provided footswitch or the front panel GO button, in either a timed automatic mode or a manual shutter footswitch mode. A computer can also control the unit via an I/O connection.

Lesco UV Singapore Distributor

MINI CONVEYOR STANDARD VERSION 6" 300WPI 36"L 2-100FPM 120V/60Hz
LC310060S
  AUV WEST MINI CONVEYOR Std 6" 300WPI 
   
AUV WEST Part #   Description
   
LC310060S MINI CONVEYOR STANDARD VERSION 6" 300WPI 36"L  2-100FPM 120V/60Hz
   
  System includes:
   
  *  UV Curing Lamp 6" effective cure width 300WPI Mercury
  *  6" Belt width UV resistant coated fiberglass
  *  2-100 FPM Variable Speed
  *  Elapsed time indicator
  *  Vacuum hold-down
  *  Clearance for one inch high parts
  *  Tri-power Lamp switching (300, 200, 125 W/in.)
  *  Plexiglas light shields
  *  Optical shielding
  *  Focused reflector
  *  120V/60Hz.
  *  Dimensions 36"L x 31"W x 22"H125 Lbs.
   
   
  OPTIONS
   
  *  Adjustable lamp Height up to 4"
  *  Lamp parallel to the belt
  *  Stainless Steel Belt 3/8" opening-6" width
  *  Stand
  *  Lamp 6"/300WPI Ozone free A9461FCB
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Data read
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth
   
  AUV WEST MINI CONVEYOR EXTENDED 6" 300WPI 
   
AUV WEST Part #   Description
   
LC310060X MINI CONVEYOR EXTENDED VERSION 6" 300WPI 54"L  2-100FPM 120V/60Hz
   
  System includes:
   
  *  UV Curing Lamp 6" effective cure width 300WPI Mercury
  *  6" Belt width UV resistant coated fiberglass
  *  2-100 FPM Variable Speed
  *  Elapsed time indicator
  *  Vacuum hold-down
  *  Clearance for one inch high parts
  *  Tri-power Lamp switching (300, 200, 125 W/in.)
  *  Plexiglas light shields
  *  Optical shielding
  *  Focused reflector
  *  120V/60Hz.
  *  Dimensions 54"L x 31"W x 22"H125 Lbs.
   
   
  OPTIONS
   
  *  Adjustable lamp Height up to 4"
  *  Lamp parallel to the belt
  *  Stainless Steel Belt 3/8" opening-6" width
  *  Stand
  *  Lamp 6"/300WPI Ozone free A9461FCB
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Data read
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth
   
  AUV WEST MINI CONVEYOR Std 6" 400WPI 
   
AUV WEST Part #   Description
   
LC410060S MINI CONVEYOR STANDARD VERSION 6" 400WPI 36"L  2-100FPM 220V/60Hz
   
  System includes:
   
  *  UV Curing Lamp 6" effective cure width 400WPI Iron
  *  6" Belt width UV resistant coated fiberglass
  *  2-100 FPM Variable Speed
  *  Elapsed time indicator
  *  Vacuum hold-down
  *  Clearance for one inch high parts
  *  Tri-power Lamp switching (400, 300, 200 W/in.)
  *  Plexiglas light shields
  *  Optical shielding
  *  Focused reflector
  *  220V/60Hz.
  *  Dimensions 36"L x 31"W x 22"H125 Lbs.
   
   
  OPTIONS
   
  *  Adjustable lamp Height up to 4"
  *  Lamp parallel to the belt
  *  Stainless Steel Belt 3/8" opening-6" width
  *  Stand
  *  Lamp Mercury 6"/400WPI A9462MCB
  *  Lamp Gallium 6"/400WPI A9462GCB
  *  Lamp Iron 6"/400WPI A9462ICB
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Data read
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth
   
  AUV WEST MINI CONVEYOR EXTENDED 6" 400WPI 
   
AUV WEST Part #   Description
   
LC410060X MINI CONVEYOR EXTENDED VERSION 6" 400WPI 54"L  2-100FPM 220V/60Hz
   
  System includes:
   
  *  UV Curing Lamp 6" effective cure width 400WPI Iron
  *  6" Belt width UV resistant coated fiberglass
  *  2-100 FPM Variable Speed
  *  Elapsed time indicator
  *  Vacuum hold-down
  *  Clearance for one inch high parts
  *  Tri-power Lamp switching (400, 300, 200 W/in.)
  *  Plexiglas light shields
  *  Optical shielding
  *  Focused reflector
  *  220V/60Hz.
  *  Dimensions 54"L x 31"W x 22"H125 Lbs.
   
   
  OPTIONS
   
  *  Adjustable lamp Height up to 4"
  *  Lamp parallel to the belt
  *  Stainless Steel Belt 3/8" opening-6" width
  *  Stand
  *  Lamp Mercury 6"/400WPI A9462MCB
  *  Lamp Gallium 6"/400WPI A9462GCB
  *  Lamp Iron 6"/400WPI A9462ICB
ARB1001 EIT POWER PUCK Radiometer
ARB1003 Radiometer Uvcure Plus 2 - 365nm, Hi Power  10mW-10W
ARB1004 Radiometer Micro Cure 2W
ARB1006 Radiometer Micro Cure 10W
ARB9002 MICROCURE Starter Kit 2-MICROCURE Radiometers and 1-Data read
AUB1003 UV PowerMap Hi Power 200mW-20W, UVA,UVB,UVC,UVV.
AUB1004 UV Map Plus Hi Power  200mW-20W,  1 Bandwidth

Radiometers
AIB1001

Radiometers

The Lesco UV division of American Ultraviolet offers a wide range of the highest quality, most accurate radiometers. UV and VIS Radiometers are essential in process validation and final commissioning operations for literally any photocuring operation. With radiometry, damaged lightguides, bulbs or reflectors can often be detected before they destroy long term process integrity. Our radiometer line-up includes:>

  • LESCO Spot Cure Radiometer – our most popular radiometer product is available in UVA, UVB, UVC or VIS intensity sensing versions
  • UV MAP and PowerMap – senses, profiles and stores peak power and total energy density. Up to one million data points can be stored
  • UVICURE and PowerPuck – ideal for use with all of our conveyor products, these instruments measure peak intensity and total dosage (Joules/cm2)
  • MicroCure – because of its incredibly small size, this radiometer can be used to measure peak intensity and total dosage (Joules/cm2) in nearly inaccessible application
  Lesco provides recalibration services
RECAL RECALIBRATION OF AIB1001 (Spotcure Radiometer)
RECAL-AIB1001ER RECALIBRATION OF AIB1001-ER (EIT Radiometer Extended Range)
RECAL-ARB1001 RECALIBRATION OF ARB1001 (Power Puck II)
RECAL-ARB1003 RECALIBRATION OF ARB1003 (UVCure Plus II)
RECAL-E5B1020 RECALIBRATION OF E5B1020 (Power Wizard PW-250)
RECAL-ARB1010 RECALIBRATION OF ARB1010 (MODEL 200)

Spectrum 100 Precision UV Spot Curing System
VZM1001

Spectrum 100 Precision UV Spot Curing System

GreenSpot2 /100watt system:

  • Small 10” x 10.5” x 5” stainless box design
  • 100 watt bulb, programmable timer
  • 10-15 watt of UV output, 2000+ hours of bulb life can be used with any standard liquid filled or our new fused fiber light guides 

AUVCD/LESCO UV Lamp Advantage:

Spectrum 100w employs premium mercury short arc lamps rather than mercury halide bulbs. Short arc lamps have a much higher UV output than halides which primarily emit visible light. LESCO bulbs also feature the LONGEST Bulb Life (2000 Hours Expected hours). 

Advanced Features

  • Stainless Steel Construction 
  • Clean Room Ready Class 100 
  • Patented Lamp Reflector Assembly Designed for Easy Access
  • Accepts Standard Liquid & High Power Fiber Optic Lightguides 
  • Power Input 120/220 VAC 50/60 Hz
  • Optional Voltage 90/264 VAC 50/60 Hz
  • Small 9.75 x 12.5 inch footprint

 

Spot Cure
Green Spot

The attractive, all anodized aluminum Green Spot is the simple and reliable answer to today's solvent-free manufacturing environment. Assembled with state-of-the-art components, it provides reliable and powerful spot curing every time. Its flexible wand delivers dedicated, concentrated UV spot curingwhere it's needed, and its compact size (9.75 x 12.5") is ideal for R&D or other manual operations. And a unique "pop-off" lid allows this UV spot cure device to access the lamp reflector assembly, a big feature for intensive manufacturing line operations where downtime maintenance must be kept to a minimum. This feature allows the user to change lamp reflector assemblies in less than a minute.>

Standard Features

  • Clean-room-ready (Class 100) 
  • Total weight under 14 lbs.
  • Digital shutter time with foot switch
  • Dual-fan cooling system
  • 5mm x 1m liquid-filled light guide

Spot Cure, Max
VSM3002

Super Spot MAX™

The Super Spot MAX from Lesco offers the process engineer tremendous control and monitoring from both local and remote monitoring locations. It is ideal for any spot curing application where high UV intensity at highest regulation is required for process speed improvement, regulatory compliance, and superior cure strength. It is perfect for curing adhesives, coatings, inks, and other UV curable materials where physical location and cure area dictate the use of a discrete fiber optic UV delivery system. >

Featuring a membrane front panel and a powerful RS485 serial interface, it allows access to every parameter of the process from the shop floor or the supervisor's desk. It's powerful but user-friendly DataMax™ software creates records of every cure cycle, keeping them in its built-in memory until downloaded and reset. Simple alphanumeric commands add to the ultra flexible serial interface capabilities. The Super Spot MAX also features a proprietary Optical Feedback system that insures uniform output irradiance and optimal process validation.>

Super Spot MAX HP™

The Super Spot MAX HP (High Power) is built on the same hardware and software platforms as the Super Spot MAX, however, it is designed to deliver the most extreme UV and visible spot area energy and intensity ever achieved. The Super Spot MAX HP is recommended for very high speed process lines and specialty applications that require either extreme intensity or split second cure times with superior cure strength. It is particularly useful for full-automated applications. Because of the extreme intensity, we only recommend the use of FibreFire™ fiber optic UV delivery systems with the Super Spot MAX HP.>

Standard Features (Super Spot MAX)

  • UVA Peak (@315-400nm) 25,000 mW/ cm2; UVA Rates (@315-400nm) 20,000 mW/cm2; Total Intensity (UVA, B, C, V) 30,000+ mW/cm2 
  • Spectral Output: VIS/UVA/UVB/UVC; major peaks @ 365nm, 254nm, 302nm, 312nm and 405nm; filterable 
  • 8.5 x 11" x 13.5" deep; 20 lbs. 
  • Mercury vapor, 100W DC short arc 
  • Liquid-filled or fiber optic lightguide

Standard Features (Super Spot MAX HP)

  • UVA Peak (@315-400nm) 30,000 mW/ cm2; UVA Rates (@315-400nm) 25,000 mW/cm2; Total Intensity (UVA, B, C, V) 45,000+ mW/cm2 
  • Spectral Output: VIS/UVA/UVB/UVC; major peaks @ 365nm, 254nm, 302nm, 312nm and 405nm; filterable
  • 8.5 x 11" x 13.5" deep; 20 lbs. 
  • 200W DC short arc 
  • High temperature FO (FibreFire™)
  Replacement Spares
VUM1029 Switch controlled shutter interface I/O 
VUM1028 Shutter interface I/O 
VUM1030 Voltage controlled shutter interface I/O 
VUM1031 Shutter interlock (P2 & 4) added to either I/O option
VUM1032 Voltage controlled shutter interface I/O 
   
   
KKB2006 DataMAX Process Validation software
  (Provides full data acquisition of date/time stamped process
  parameters, user calibration events and data export through
  RS485 of up to 99 MAX systems)
   
KKB2009 Kit Spare Parts Max-MKIII: Bulb-Reflector-IR Filter
LPB1008 Replacement 100 Watt UV bulb
SSM3031 Replacement Reflector
EVB2115 Replacement Footswitch
OFB1004 280-480nm IR Filter
OFB1008 280-400nm IR Filter
KFB1019 Intake Filter (5 pack)

Super Spot Max 200W
VSM3002-HP

Super Spot MAX HP™

The Super Spot MAX HP (High Power) is built on the same hardware and software platforms as the Super Spot MAX, however, it is designed to deliver the most extreme UV and visible spot area energy and intensity ever achieved. The Super Spot MAX HP is recommended for very high speed process lines and specialty applications that require either extreme intensity or split second cure times with superior cure strength. It is particularly useful for full-automated applications. Because of the extreme intensity, we only recommend the use of FibreFire™ fiber optic UV delivery systems with the Super Spot MAX HP.>

Standard Features (Super Spot MAX HP)

  • UVA Peak (@315-400nm) 30,000 mW/ cm2; UVA Rates (@315-400nm) 25,000 mW/cm2; Total Intensity (UVA, B, C, V) 45,000+ mW/cm2 
  • Spectral Output: VIS/UVA/UVB/UVC; major peaks @ 365nm, 254nm, 302nm, 312nm and 405nm; filterable
  • 8.5 x 11" x 13.5" deep; 20 lbs. 
  • 200W DC short arc 
  • High temperature FO (FibreFire™) 
VUM1029 Switch controlled shutter interface I/O 
VUM1028 Shutter interface I/O 
VUM1030 Voltage controlled shutter interface I/O 
VUM1031 Shutter interlock (P2 & 4) added to either I/O option
VUM1032 Voltage controlled shutter interface I/O 
   
   
KKB2006 DataMAX Process Validation software
  (Provides full data acquisition of date/time stamped process
  parameters, user calibration events and data export through
  RS485 of up to 99 MAX systems)
   
KKB2010 Kit Spare Parts Max-HP: Bulb-Reflector-IR Filter
LPB2001 MAX-HP 200W Bulb
SSM3045 Replacement Reflector
EVB2115 Replacement Footswitch
OFB1004 280-480nm IR Filter
OFB1008 280-400nm IR Filter
KFB1019 Intake Filter (5 pack)

SUPER SPOT MAX ELITE 200 Watt UV spot curing system
VSM3004

Super Spot MAX™ Elite

Affordable UV Curing Solution for system integrators; aerospace companies; medical device, electronic/optoelectronic, automotive, and all other manufacturers needing full dynamic process control.

Standard Features (Super Spot MAX Elite)

  • Industry first user-friendly touch screen with fully programmable system control is as easy as a smart phone
  • Fully automatic optical feedback allows user to set output requirement that will be maintained for life of the bulb
  • USB, micro SD and ethernet connectivity makes system fully upgradeable
  • Adjustable UV output in .05 w/cm2 increments from .05-30W/cm2
  • 200 watt lamp life up to 3,000 hours
  • Fully selectable I/O connectivity helps user avoid rewiring
  • Intelligent lamp technology records bulb hours and more
  • Light guide recognizes and accepts all standard liquid and high power fiber light guides
  • Easy to maintain – no tools needed; service door allows access to all components
  • Standard 280-480nm easy-to-change filter (optional easy-tochange IR filter available)
  • Compact; lightweight (10 lbs) 
  • Worldwide voltage 90/240 VAC; 50/60 Hz
  • Clean room ready 
  • CE
  Replacement Spares
KKB2010 Kit Spare Parts Max-HP: Bulb-Reflector-IR Filter
LPB2001 MAX-HP 200W Bulb
SSM3045 Replacement Reflector
EVB2115 Replacement Footswitch
OFB1004 280-480nm IR Filter
OFB1008 280-400nm IR Filter
KFB1019 Intake Filter (5 pack)

Lesco Singapore Distributor

UV LIGHT 350a
FAM1013
FAM1013 UV LIGHT 350a
  The AUV WEST HANDHELD UV System consists of one Irradiator and one 
   Power Supply.
   
  System includes:
   
  SAM1041- POWER SUPPLY VARIABLE .4~1.8KW                         
  * Solid State Power Supply
  * Self diagnostic LED indicators
  * Low power standby
  * 10 pounds
  * Immediate ignition and restrike
  * 90~264VAC, 50/60HZ
  * 5 Meter power cord standard
  * 20 Amps
     *  Dimensions 19" L x 10"W x 7-1/2"H
   
  SAM1042-IRRADIATOR 5-1/4"  350WPI
     * Works with power supply SAM1041 or SAB1043
     * 5 Meters of Lamp cable standard
   
   
  OPTIONS
   
SAM1041 POWER SUPPLY VARIABLE .4~1.8KW                         
   
SAM1042 IRRADIATOR 5-1/4"  350WPI
   
SAM1038                                                                                                       IRRADIATOR 6” 300WPI
     * Works with power supply SAM1041 or SAB1043
     * 5 Meters of Lamp cable standard
   
SEM1086 STAND for HANDHELD SYSTEM
   
LLB3032 Replacement 6"   300WPI    Mercury  Lamp for SAM1038
   
LLB3034 Replacement 5-1/4" 350WPI Mercury Lamp for SAM1042

 

Lesco Singapore Distributor

Showing 1 to 14 of 14 (1 Pages)
About US
  • TAKEIKI PTE LTD IS A DYNAMIC AND FAST GROWING COMPANY. WE DISTRIBUTE WELL KNOW BRANDS INDUSTRIAL AUTOMATION PRODUCTS. AND ALSO PROVIDES INCLUDES FABRICATION, PRECISION ENGINEERING, VISION AND PLC PROGRAMMING BESIDES THE MRO (MAINTENANCE, REPAIR AND OPERATING SUPPLIES).
Information
Delivery Information

  • All will be self-collect, ex-work Takeiki unless specify in the quotation.
Quality Policy

Takeiki is committed in providing the highest service level and ensuring products from manufacturers' free from visual defects.

To achieve the above through:

  • Doing things right the first time
  • Consistently meet or exceed customer's expectations in service level.
  • Continuous improvements in service and performance
  • Perform visual inspections and photos upon receipt
Terms and Conditions
Customer Service
Locate US
Takeiki Pte Ltd, 280 Woodlands Industrial Park E5, #06-43/44, Singapore 757322

+65 6286 7312
sales@takeiki.net