Takeiki
Top
Display: ListGrid
Show:
Sort By:
PARTICLES PLUS 8303
PARTICLES PLUS 8303

PARTICLES PLUS 8303

Size Range 0.3 to 25μm
Size Channels Factory calibrated at 0.3, 0.5 and 5.0 μm with user-selectable middlesize channel
Flow rates 0.1 CFM (2.83 LPM)
Concentration Limit 4,000,000 Particles/ft³ @ 5% coincidence loss
Battery Run Time 10 hours
Light Source Long life laser diode
Counting Efficiency 50% @ 0.3 μm; 100% for particles >0.45 μm per JIS
Zero Count <1 count / 5 minutes (<2 particles / ft³) (per ISO 21501-4 & JIS)
Count Modes Automatic, manual, real-time meter, cumulative/differential, mass concentration, count or concentration
Count Alarms 1 to 9,999,999 counts
Calibration NIST traceable
Display 4.3″ (10.9 cm) WQVGA (480×272) color touch screen
Printer (Optional) External thermal printer
Vacuum Source Internal pump with automatic flow control
Filtered Exhaust Internal HEPA filter
Number of Channels 3
Custom Size Channels Calibration for custom size channels available
Audible Alarm Adjustable built-in alarm
Battery Removable Li-ion
Battery Recharge Time <2 hours
Reports ISO 14644-1, EU GMP Annex 1, FS 209E
Recipes 50 user-configurable recipes
Communication Modes USB
Optional Communication Modes Ethernet, Wireless 802.11 b/g, RS485 or RS232
Alarm Alarms on counts for all particle sizes, low battery, sensor failure, environmental sensors and flow
Standards ISO 21501-4 and JIS B9921
Calibration Recommended minimum once per year
External Surface High impact injection molded plastic
Dimensions (L x W x H) 10” x 5” x 4.5” (25.4 cm x 12.9 cm x 11.4 cm) includes handle and does not include probes
Weight 2.2 lb (1.0 kg)
Accessories Quick start guide, operating manual on USB flash drive, isokinetic probe, purge filter, battery, data download software, USB cable, power supply & cable
Optional Accessories Printed manual, carrying case, spare battery, external battery charger, external printer, isokinetic probes and temperature relative humidity sensor
Buffer Memory 45,000 sample records (rotating buffer) including particle count data, environmental data, locations and times. Scrollable on screen or printout
Sample Locations Up to 1,000 locations 20 characters long
Sample Time 1 second to 99 hours
Power 110 to 240 VAC 50/60 Hz universal in-line power supply
Operating Conditions 41º to 104ºF (5º to 40ºC) / 20% to 95% non-condensing
Storage Conditions 32º to 122ºF (0º to 50ºC) / Up to 98% non-condensing
Warranty 1 Year. Extended warranties available.

DUST PARTICLES COUNTER

PARTICLES PLUS SINGAPORE DISTRIBUTOR

 

PARTICLES PLUS 8306
PARTICLES PLUS 8306

 

PARTICLES PLUS 8306

Size Range 0.3 to 25μm
Size Channels Factory calibrated at 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm variable binning
Flow rates 0.1 CFM (2.83 LPM)
Concentration Limit 4,000,000 Particles/ft³ @ 5% coincidence loss
Battery Run Time 10 hours
Light Source Long life laser diode
Counting Efficiency 50% @ 0.3 μm; 100% for particles >0.45 μm per JIS
Zero Count <1 count / 5 minutes (<2 particles / ft³) (per ISO 21501-4 & JIS)
Count Modes Automatic, manual, real-time meter, cumulative/differential, mass concentration, count or concentration
Count Alarms 1 to 9,999,999 counts
Calibration NIST traceable
Display 4.3″ (10.9 cm) WQVGA (480×272) color touch screen
Printer (Optional) External thermal printer
Vacuum Source Internal pump with automatic flow control
Filtered Exhaust Internal HEPA filter
Number of Channels 6
Custom Size Channels Calibration for custom size channels available
Audible Alarm Adjustable built-in alarm
Battery Removable Li-ion
Battery Recharge Time 4 hours within instrument (<2 hours with external battery charger)
Reports ISO 14644-1, EU GMP Annex 1, FS 209E
Recipes 50 user-configurable recipes
Communication Modes Ethernet and USB
Optional Communication Modes Wireless 802.11 b/g, RS485 or RS232
Environmental Sensor Includes temperature and relative humidity probe 32º to 122ºF (0º to 50ºC) ±1ºF (0.5ºC), 15-90% ±2% relative humidity
Alarm Alarms on counts for all particle sizes, low battery, sensor failure, environmental sensors and flow
Standards ISO 21501-4 and JIS B9921
Calibration Recommended minimum once per year
External Surface High impact injection molded plastic
Dimensions (L x W x H) 10” x 5” x 4.5” (25.4 cm x 12.9 cm x 11.4 cm) includes handle and does not include probes
Weight 2.2 lb (1.0 kg)
Accessories Quick start guide, operating manual on USB flash drive, isokinetic probe, temperature relative humidity sensor, purge filter, battery, data download software, USB cable, power supply & cable
Optional Accessories Printed manual, carrying case, spare battery, external battery charger, external printer and isokinetic probes
Buffer Memory 45,000 sample records (rotating buffer) including particle count data, environmental data, locations and times. Scrollable on screen or printout
Sample Locations Up to 1,000 locations 20 characters long
Sample Time 1 second to 99 hours
Power 110 to 240 VAC 50/60 Hz universal in-line power supply
Operating Conditions 41º to 104ºF (5º to 40ºC) / 20% to 95% non-condensing
Storage Conditions 32º to 122ºF (0º to 50ºC) / Up to 98% non-condensing
Warranty 2 Years. Extended warranties available.

PARTICLES PLUS SINGAPORE DISTRIBUTOR

DUST PARTICLES COUNTER

PARTICLES PLUS 8506
PARTICLES PLUS 8506

PARTICLES PLUS 8506

Size Range 0.5 to 25.0 μm
Size Channels Factory calibrated at 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm variable binning
Flow rates 2.83 LPM (0.1 CFM)
Concentration Limit 4,000,000 Particles/ft³ @ 5% coincidence loss
Battery Run Time 10 hours
Light Source Long life laser diode
Counting Efficiency 50% @ 0.5 μm; 100% for particles >0.75 μm per JIS
Zero Count <1 count / 5 minutes (<2 particles / ft³) (per ISO 21501-4 & JIS)
Count Modes Automatic, manual, real-time meter, cumulative/differential, mass concentration, count or concentration
Count Alarms 1 to 9,999,999 counts
Calibration NIST traceable
Display 4.3″ (10.9 cm) WQVGA (480×272) color touch screen
Printer (Optional) External thermal printer
Vacuum Source Internal pump with automatic flow control
Filtered Exhaust Internal HEPA filter
Number of Channels 6
Custom Size Channels Calibration for custom size channels available
Audible Alarm Adjustable built-in alarm
Battery Removable Li-ion
Battery Recharge Time 4 hours within instrument (<2 hours with external battery charger)
Reports ISO 14644-1, EU GMP Annex 1, FS 209E
Recipes 50 user-configurable recipes
Communication Modes Ethernet and USB
Optional Communication Modes Wireless 802.11 b/g, RS485 or RS232
Environmental Sensor Includes temperature and relative humidity probe 32º to 122ºF (0º to 50ºC) ±1ºF (0.5ºC), 15-90% ±2% relative humidity
Alarm Alarms on counts for all particle sizes, low battery, sensor failure, environmental sensors and flow
Standards ISO 21501-4 and JIS B9921
Calibration Recommended minimum once per year
External Surface High impact injection molded plastic
Dimensions (L x W x H) 10” x 5” x 4.5” (25.4 cm x 12.9 cm x 11.4 cm) includes handle and does not include probes
Weight 2.2 lb (1.0 kg)
Accessories Quick start guide, operating manual on USB flash drive, isokinetic probe, temperature relative humidity sensor, purge filter, battery, data download software, USB cable, power supply & cable
Optional Accessories Printed manual, carrying case, spare battery, external battery charger, external printer and isokinetic probes
Buffer Memory 45,000 sample records (rotating buffer) including particle count data, environmental data, locations and times. Scrollable on screen or printout
Sample Locations Up to 1,000 locations 20 characters long
Sample Time 1 second to 99 hours
Power 110 to 240 VAC 50/60 Hz universal in-line power supply
Operating Conditions 41º to 104ºF (5º to 40ºC) / 20% to 95% non-condensing
Storage Conditions 32º to 122ºF (0º to 50ºC) / Up to 98% non-condensing
Warranty 2 Years. Extended warranties available.

PARTICLES PLUS SINGAPORE DISTRIBUTOR

DUST PARTICLES COUNTER 

Showing 1 to 3 of 3 (1 Pages)
About US
  • TAKEIKI PTE LTD IS A DYNAMIC AND FAST GROWING COMPANY. WE DISTRIBUTE WELL KNOW BRANDS INDUSTRIAL AUTOMATION PRODUCTS. AND ALSO PROVIDES INCLUDES FABRICATION, PRECISION ENGINEERING, VISION AND PLC PROGRAMMING BESIDES THE MRO (MAINTENANCE, REPAIR AND OPERATING SUPPLIES).
Information
Delivery Information

  • All will be self-collect, ex-work Takeiki unless specify in the quotation.
Quality Policy

Takeiki is committed in providing the highest service level and ensuring products from manufacturers' free from visual defects.

To achieve the above through:

  • Doing things right the first time
  • Consistently meet or exceed customer's expectations in service level.
  • Continuous improvements in service and performance
  • Perform visual inspections and photos upon receipt
Terms and Conditions
Customer Service
Locate US
Takeiki Pte Ltd, 280 Woodlands Industrial Park E5, #06-43/44, Singapore 757322

+65 6286 7312
sales@takeiki.net